For type B outlets used in North America, Central America and Japan. How To Set Up your Grounding Product Step 1: Check Your Outlets For Ground In order to use your grounding product you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging in your product, you must check that the outlet is grounded by plugging in the outlet checker. Two amber lights illuminated is GOOD and means that you have a proper ground and you are ready to connect your product. If you have any other light combination it means your outlet is NOT properly grounded. If that is the case, you can use the Grounding Rod in the optional step 3. Step 2: Plug in your Safe T Cube Adaptor Plug your Safe T Cube Adapter into your properly grounded outlet. Step 3: (OPTIONAL) Using The Ground Rod When Outlets Aren’t Grounded (Sold Separately) Use this option if your outlets are not properly grounded. The Grounding Rod is also useful when camping, or traveling to a location without grounded electrical outlets! 1. First Push the Grounding Rod directly into the earth (20 cm to 25 cm) close to the foundation of the building. 2. Run the cord from the Grounding Rod, under or around a window or door, near where you will be using your grounding product. 3. Make sure to cover the cord to prevent tripping. 4. Bring the cord into your home (via window or door), and plug the prong end of your Connection Cord into the receptacle end of the Grounding Rod cord. If you live in a dry area, soak the earth around the Ground Rod from time to time for maximum conductivity. Step 4. 1. Attach snap end of the Cord, to the nub on the grounding product. 2. Insert prong end of the Connection Cord either directly into your grounded outlet, or the Safe T Cube (that is plugged into a grounded outlet), or into the ground rod cord if you use a ground rod connection. 3. Make a physical connection with the grounding product. Either direct skin contact, or through 1 thin layer of material. (clothing or sheets). Check directions for your specific product. Safety Warning Always use as directed. The Outlet Checker is designed for 120V 60Hz use only! Use only our approved connection cord with built-in internal safety feature. If your Outlet Ground Checker does not display 2 amber lights, then do not use the product before consulting an electrician. For your safety, place the connection cord in such a way that it doesn’t cause a tripping hazard.
$15ADD TO CART