This Body Band Kit includes: 1 Large Body Band (can be adjusted from 11″ to 23″) 1 Coil Cord 1 Outlet Checker 1 Safe-T Cube Adapter 1 User’s Guide How It Works Step 1: Check Your Outlets For Ground In order to use your Body Band you must connect it to the “ground port” of a grounded 3 prong outlet. Before plugging in your Body Band, you must check that the outlet is grounded by plugging in the outlet checker. Two amber lights illuminated is GOOD and means that you have a proper ground and you are ready to connect your Body Band. If you have any other light combination it means your outlet is NOT properly grounded. If that is the case, you can use the Grounding Rod in the optional step 3. Step 2: Plug in your Safe T Cube Adaptor Plug your Safe T Cube Adapter into your properly grounded outlet. Step 3: Using The Ground Rod When Outlets Aren’t Grounded (Optional and Sold Separately) The Grounding Rod is also useful when camping, or traveling to a location without grounded electrical outlets! 1. First Push the Grounding Rod directly into the earth (20 cm to 25 cm) close to the foundation of the building. 2. Run the cord from the Grounding Rod, under or around a window or door, near where you will be using your Body Band. 3. Make sure to cover the cord to prevent tripping. 4. Bring the cord into your home (via window or door), and plug the prong end of your 15′ connection cord into the receptacle end of the Grounding Rod cord. If you live in a dry area, soak the earth around the Ground Rod from time to time for maximum conductivity. Step 4: Using Your Body Band 1. Place the Body Band in desired location. 2. Snap the cord onto the Body Band connection tab. 3. Insert the end of your Cord into the 3rd hole of a grounded wall outlet. 4. You must make direct skin contact with Body Bands. Step 5: How To Test For Conductivity With The Continuity Tester (Sold Separately) The purpose of the Continuity Tester is to verify that your grounding product is conductive. Please see Testing Instructions Here. Step 6: Care Instructions The preferred cleaning method is to hand wash with mild detergent. Air dry, or put in the dryer on low heat. The conductive fiber is silver. Do not bleach Do not use fabric softener Do not use oxidizing cleaners If machine washing is necessary it is advised to use a small garment bag. Never wash the cord. DON’T: Don’t wash with bleach or fabric softeners Don’t use whitening detergents, oxi-detergents OR detergents with oils like lavender or coconut oil Don’t use dryer sheets Absolutely No Dry Cleaning Bleach, body lotions and oils can tarnish the silver thread rendering it non conductive. Fabric softener builds up on the silver and also ruins its conductive properties. It is advised to wait one hour to use the product after applying lotion to the skin. Safety Warning Always use as directed.
$70ADD TO CART